5 ton single girder eot crane for light duty material handling in steel pipe workshop.
For steel industries, Dongqi Hoist and Cranes has offered types of steel mill cranes to meet the various material handling requirements in every process of steel production. Dongqi Hoist and Crane has the following eot cranes for the steel industries.
Steel handling devices and tools: Crane hook
Steel coil handling devices and tools:Crane c hook 
Ladle handling devices and tools:Ladle hook
Steel coil and plate handling tools: Lifting tongs 
Steel coil handling devices； Roll lifter
Sheet lifter & plate lifter for overhead crane
Steel handling devices and tools:Crane electromagnet
Steel handling devices and tools:Round electromagnet
Steel handling devices and tools:Carrier beam
Steel handling devices and tools:Grab bucket 
Steel handling devices and tools:Permanent lifting magnetFor Saudi Arabia market, Dongqi Hoist and Crane has offered types of cranes and hoists to meet the requirements of various industries. In the following, the 5 ton eot crane for the Saudi Arabia h pipe manufacturing workshop is for your reference to get your custom designed eot crane.
Due to the expansion, the Saudi Aribia clients established a new workshop for the production of steel beam, pipe fabrication. After the completion of steel workshop, the eot crane is needed for material handling in the workshop. Dongqi Hoist and Crane is his first choice, and in return Dongqi gives him the first class eot crane services.
The stee pipes of the Saudi Aribian clients who need the 5 ton eot crane
Due to the construction of the steel pipe workshop has been completed, the custom designed eot Crane is required to go match with the designs of the workshop. Based on the workshop dimension, the eot crane engineer found the overhead clear room of the workshop is limited and on the other hand, the lifting height is required to be guaranteed. Therefore 5 ton eot crane with European hoist design is offered to the Saudi Arabia client.
5 ton eot crane design drawing for the Saudi Arabian clients
Due to the limited space, the common design of eot crane main girder may collide the workshop, the flat type girder is designed for the 5 ton eot crane.
Flat girder design for the 5 ton eot crane
With the special eot crane design, where the main beam and the end truck is connected, the 5 ton eot crane could meet the work requirements and match the workshop better.
The eot crane 5 ton capacity is produced within half month, and the Saudi clients came to visit our eot crane workshop for the inspection. The quality of the 2 sets 5 ton eot cranes help Dongqi won the satisfaction of the clients.
Saudi Aribian clients with Dongqi eot crane workshop - Flat girder design for the 5 ton eot crane
Saudi Aribian clients with Dongqi eot crane workshop
There are three obvious features of 5 ton eot crane for the Saudi Arabia client, which are the flat top eot crane girder, the bucket design and the cost-effective eot crane price.
There is special design and use special eot crane rail to reach the customer’s demands.
Because the low point of roof is low, so in order to let the eot crane travel smoothly , we use the flat steel crane rail and specifications design the connection that main beam and end truck .
Flat crane rail for the 5 ton eot crane Saudi Aribia
For each custom eot crane requirement, Dongqi Crane is always determined to win the satisfactions of clients.
Parameters needed to get your eot crane
If you have any inquiry, please leave us the main parameters of the product you need such as,
If you need any eot crane, please feel free to contact us or just leave a message below and we will reply you as soon as possible.
Crane Projects
contact us
