Upgrade Your Workshop with a 5 Ton Overhead Crane Available in Canada

Background

A mechanical repair and maintenance workshop in Canada was looking for a new bridge crane to replace its aging and outdated one. The 2 ton top running overhead crane previously used by the workshop occupies too much space, causing certain inconveniences in the production process. The client asked for our assistance in designing an underslung bridge crane system to save operating space and improve work efficiency.
 
Moreover, the workshop needed the suspension crane that could lift heavier loads to 5 tons, had a longer reach, was more energy-efficient, was capable of lifting heavy loads, such as engines and transmissions, and could be easily moved around the workshop to access different areas. 

Solution

Our sales engineer recommended a 5 ton European standard underhung overhead crane to the client. This type of crane is designed to be mounted under the roof of a workshop, and it has a European standard monorail hoist that can lift loads up to 5 tons. The under running overhead crane has a reach of 9.7 meters, a lifting height of 6.1 meters, and was powered by an energy-efficient AC motor, allowing the operator to access different areas of the workshop. 

Crane Design Drawing for Reference

Crane Design Specifications

• Crane type: NLX Euro-style single girder suspension crane
• Lifting capacity: 5 tons
• Span: 9.7 meters
• Lifting height: 6.1 meters
• Crane traveling speed: 2.0-20m/min
• Hoist lifting speed: 0.8/5.0m/min
• Crane traveling power: 2*0.4kw
• Hoist lifting power: 0.8/4.9kw
• Hoist traveling power: 0.45kw
• Power supply: 575V/50Hz/3 Phase 

Benefits

• The Euro-style 5 ton suspension crane redefines the way machinery repair and maintenance workshops work with its superior performance and reliability. Its suspension design not only liberates the ground space but also greatly improves working efficiency. Whether it is high-altitude maintenance, equipment installation, or component replacement, it can be easily handled, providing users with an excellent experience.
• This underhung overhead crane has excellent parameters and characteristics. It adopts the European standard design, which ensures the stability and safety of the crane. With a maximum lifting capacity of 5 tons, it can handle various heavy jobs. At the same time, its innovative control system and intelligent functions make the operation more precise and convenient. Users can easily control various operations of the crane through the remote control, which improves the flexibility and efficiency of work.
• This 5 ton European overhead crane is suitable for various scenarios and usage needs. Whether it's mechanical repairs, equipment maintenance, or parts replacement, it's up to the task. Its flexible design allows the crane to easily adapt to operations at different heights and angles, meeting various complex work needs of users. At the same time, the suspension crane is also equipped with protective devices, which effectively protect the safety of operators and equipment. 

Crane Production and Installation

The production of European type 5 ton suspension crane has been finished now and is ready to be exported to Canada. As the client told us before, the crane will be installed in their workshop by a local team of experienced crane installers.



 
Of course, all our cranes and hoists come with installation instructions, and we also provide on-site installation services if required. 

Top Running vs. Under Running Overhead Cranes

Understanding the differences between these two types of overhead cranes will help you determine which one is best for your needs.
 
Top Running Overhead Cranes

Top running overhead cranes run on a fixed rail mounted on top of each runway beam, which allows the end trucks to carry the girder and hoist along the top. These cranes can be set up as a single girder or double girder depending on the application needs. A single girder has a trolley and hoist mounted on the bottom, whereas a double girder uses a top running trolley and hoist, allowing for additional lift height and a higher hook height.


 
Advantages of top-running overhead cranes include:

• No limiting capacity. This allows for the ability to handle both small and large loads, from 1 ton to 500 tons.
• Added lift height. Being mounted on top of each runway beam allows for increased lift height, which is beneficial to buildings with limited headroom.
• Built for higher capacities. Top-running overhead cranes are built larger than under-running cranes to grant them the ability to handle higher capacities.
• Easy installation. Since the crane is supported by the runway beams, it eliminates the suspended load factor to make installation simple.
• Less maintenance. Over time, top-running overhead cranes do not require as much maintenance other than the routine checking of the tracking for proper alignment and any issues.

Under Running Overhead Cranes

Under running overhead cranes are designed with flexibility and functionality in mind, under-running overhead cranes have a user-friendly design that provides ultimate versatility for meeting all your production needs. These cranes are also known as underhung cranes because the bottom flange of the runway beam offers support for the wheels to move the bridge across the facility.
 
The trolley and hoist of an under-running overhead crane move across the bottom flange of the bridge beam, lowering the crane’s hook and lift height. Under running overhead cranes are usually set up as single girder because a double girder design is often more expensive and not suitable for the application.


 
Advantages of under-running overhead cranes include:

• Operates well in wide bays. Underhung cranes can be operated in multiple runways, reducing the depth of the girder.
• Lighter overall design requirements. Under-running overhead cranes are much lighter, which removes the need for additional supporting columns that take up precious floor space. Instead, the crane utilizes the existing overhead building structure for support.
• Lower costs. The lightweight design and use of the existing ceiling trusses or roof structure result in lower equipment costs.
• Ability for multiple crane installations. It is possible to install under-running cranes next to each other and operate them at the same time for increased production efficiency. 

Overhead Cranes Service - DQCRANES

At DQCRANES, we are a leading manufacturer of cranes, hoists, and other material handling equipment. Our team of experts can provide you with an overhead crane solution suited to your project’s specifications.
 
We offer high-performance lifting solutions, quick delivery, and installation times backed by the industry’s best warranty. Contact us today to arrange a consultation.